Parts & Accessories

$5.99
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.

$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0

$79.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams

$132.99
Shimano Di2 External Battery Mount
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware

$135.99
Shimano Di2 External Battery Mounts
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware

$29.99
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters.
Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers.
- Bluetooth adapter for PCs to work with Rouvy
- Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers.
- Works with PC desktops and laptops.

$45.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap

$55.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap

$385.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero.
- Replaces standard drop bar shift levers
- Simple and intuitive eTap shift logic
- AXS enabled for easy personalization
- Limitless aero configurations
- Two ports per side for Blips
- Fits the included optional stem mount
- Compatible with existing eTap Blips and Clics
- Mounts inside stem faceplate cap, feed box or frame

$12.99
• To position the Shimano Di2 battery inside the fork steerer
• Including stainless steel tool to remove the set.

$74.99
The Vibe Aero Race Mount is designed for the PRO Vibe Aero handlebar/stem combination. Made of high-quality CNC machined 6061-T6 Aluminum, it fits all Pro handlebar/stem combinations.
- Compatibility (Regular): GARMIN 820, 520, 25, 20
- Compatibility (XL): GARMIN 1030, 1000, 820, 520, 25, 20
- Lifetime Guarantee
- Weight: 30g

$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter

$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter

$99.00
KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation.
- Measures up to 2.5mm elongation
- Fits all chains including 11 speed
- Handy electronic device
- Stainless hardened metal body

$11.99
Hand tight adjustability and 4mm hex wrench lockable.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Combo Mounts, Light&Camera Mounts.
- Aluminum knurled thumbscrew
- Stainless Steel bolt with 4MM hex feature
- Weight: 10g
- Anodized Color: Black
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded

$24.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000.
- Camera Adapter mount with GoPro style interface
- Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560)
- Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer.
- Centers camera in out of site position
- Improves video clarity by removing plastic mount shake
- Colors: Anodized Black
- Weight: 14grams
*Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

$24.99
This NiteRider Adapter is sold separately from K-EDGE “Combo Mount."
- Precision Machined 6061-T6 Aluminum
- Anodized Gunmetal
- Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface
- Enables compatibility with K-Edge GoBig Mounts and Combo Mounts
- 2x M4 Mounting bolts with Nylok included
- Compatible with Lumina Series, Mako Series
- Weight: 11.5 grams

$29.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system.
The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem.
Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
- Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm,
- Recommended for 0 Degree to Negative Degree Stem Angles
- Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

$4.00
GNT Axact Cadence Magnet
Product description
- Wheel magnet compatible with round and bladed spokes
- Cadence magnet includes zip ties

$5.00
Get the most out of your ride with the addition of speed and cadence. Whether you are a weekend warrior or data junkie we’ve got you covered.
Features
- Sensor magnet kit for RideSense speed and cadence sensors
Kit includes:
- RideSense speed magnet
- RideSense cadence magnet

$6.00
Combine with Giant's Computer / GoPro Combo Mount and fit your Garmin and GoPro to any Giant round or SLR Aero handlebar.

$7.00
GNT Axact 13W Replacement Mounting Bracket
Product description
- Includes mounting bracket and zip ties

$7.00
GNT Axact Pro+/Pro Mounting Bracket
Product description
- Includes mounting bracket and zip ties

$12.00
GNT Axact 6 Wired Mount Kit w/ Speed Sensor & Magnet
Product description
- Kit includes mount, sensor and magnet

$12.00
GNT Computer Extension Mount GoPro Attachment Bracket
Product description
- Giant computer extension mount GoPro attachment
- Nylon construction
- Hardware included
- Fits the following GPS mounts:
2018+ Propel Computer Mount
2018+ Alloy Out-Front GPS & GoPro Mount for Round Bar
Nylon Out-Front GPS Mount For Round Bar

$14.00
GNT Axact 9/11 Replacement Mounting Bracket
Product description
- Includes mounting bracket and zip ties
Page 1 of 2
Next page