Brakes/Levers/Pads

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

8 Series Disc Brake Pads - Disconnected two piece back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Set of four disc brake pads for one MT5, MT7 Caliper

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

With a focus on reduced weight and cross-country tuned stopping power, the SLX BL-M7100 levers provide intuitive modulation so that you can explore your limits with confidence. They feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

- Pad sets include pads and retraction spring for one caliper

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Clean up your cockpit with these direct mount shifter options for Tech levers. Featuring a variety of fitments, they reduce bar clutter and open up control layout options.

Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XT SL-M770 2008-2011, Saint SL-M810 2009-2012 and SLX SL-M660 2009-2012 · Works on Hope Tech and Tech Evo levers only

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Hope V2 Caliper Disc Brake Pads. · Fits Moto, Tech, and Tech Evo V2 Brakes · Standard Compound: softer compound than sintered; works better in dry conditions, but wears faster

Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

8 Series Disc Brake Pads - Disconnected two piece back plate - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of four disc brake pads and two pad retaining bolts for one caliper

The Shimano BR-R353 is a compact V-brake designed for road bikes. The curved arm offers tire clearance while the compact arch size is compatible with flat handlebar road bikes. - Compact arch size 90mm for proper braking power - Bending curve shape for tire clearance - Compact looking - Compatible with road brake lever for Flat Handle/Pavement bike - Not compatible with Shimano dual-control shift/brake levers

Shimano BL-R550 Road Brake Levers - Compatible with cantilevers, road calipers, and road disc brakes - Not compatilble with linear-pull brakes - Brake cable and housing set included - Brake Lever Actuation: Short Pull Super SLR - Brake Lever Use: Pair - Cable Head: Mountain

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- Works with all Formula 74mm post mount brake calipers - IS: 51mm (International Standard) tab mount - PM: 74mm post mount

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Replacement pads for Hope E4 hydraulic disc brakes.

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

· CNC machined in Barnoldswick, England · Includes mounting bolts

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

Steel backed disc brake pad with and organic compound. - Fits Zoom Disc Brakes - Steel Back w/ Organic Compound - Qty 1 = enough for 1 wheel

Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability. - Compatible with Shimano Deore XT M8020, Saint M810 and M820, and Zee M640 - Compatible with TRP Quadiem, G-Spec Quadiem, Slate T4, and G-Spec Slate

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

- Replacement pads for Campagnolo Super Record 11-speed groups - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for wet weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping - Triple: Kool-Stop's most aggressive compound combination for controlled braking in all conditions - Carbon - Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum

Replacement levers pivots pin kit for Hayes hydraulic disc levers

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Shimano Mountain brake shoe sets - Mounting hardware included - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: One Piece - Rim Compatibility: Standard

Kool-Stop's Campi 2000 insert pad was designed to fit Campagnolo systems made after the year 2000. Features: - Patented Plow Tip - Water Grooves - Dove Tail fit - Rim Friendly - Replacement pads for Campagnolo 10-speed groups Black: standard compound designed for dry condition riding Dual: combination of Salmon and Black compounds for more controlled, smoother stopping Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.