Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Wheels Manufacturing Inc. Grade 300 Loose Ball Bearings
$0.15
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
Wheels Manufacturing Inc. Loose Ball Bearings
$0.15
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle
Hope 6mm Copper Seal Washer (Bag of 10)
$0.49
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Jagwire Open End Caps for Shift Housing
$0.50 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
Sunlite Cable End Button
$0.70
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
Dia-Compe Ferrules
$0.95 - $38.19
- Dispenser of chromed ferrules
Sunlite Adjusting Barrel
$0.99
- Aluminum w/lock nut - 18mm long/6mm O.D.
KMC MissingLink Connector
$1.00 - $49.99
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Hayes Bleed Kit Adapter
$1.05 - $11.00
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Wheels Manufacturing Inc. Aluminum Headset Spacer
$1.19 - $23.00
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Hayes Caliper Rebuild Parts
$1.91 - $42.00
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
Greenfield Kickstand Rubber Foot
$1.99
The Greenfield KSRF rubber foot is a rubber nub that attaches to the bottom of your kickstand to prevent tipping. Made from rubber and made in the USA. - Fits all Greenfield kickstands and most generics
Sunlite Lever Adjusting Barrel OS
$1.99
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
Wheels Manufacturing Inc. Pedal Washers
$2.49
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Wheels Manufacturing Inc. Ball Bearing Retainer
$2.99 - $16.50
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Jagwire Brake or Shift Cable Tips
$3.99 - $39.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
KMC Half Link Adapter
$3.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Sunlite Cassette Spacer
$3.99
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8
$3.99
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers
Dia-Compe Straddle Cable Carrier
$4.99
- Aluminum straddle cable carrier for cantilever brake
Giant Slick Stainless Steel Brake Cable
$4.99
Giant's Stainless Steel brake cable is pre-stretched for high responsiveness. This cable is double ended for use with road and mountain bike cable-actuated brakes.
Jagwire Sport Slick Stainless Shift Cable
$4.99 - $12.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
Sunlite Derailleur Hanger
$4.99 - $19.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Sunlite Handlebar Shims
$4.99 - $9.99
- Alloy construction - Great for Cruiser or BMX bar conversions
Sunlite Hex Head BB Axle Bolts
$4.99
- With plastic washers - Shell: 8mm Allen head axle bolt
Sunlite Seat Binder Bolt
$4.99
- Chrome allen seat binder bolt
Sunlite Straddle Cable
$4.99
• Fits cantilever brakes • Sold individually
Electra Finger Groove Grips
$5.00 - $9.99
Relive the memories of your first bike with Electra's Finger Groove Grips. These retro grips comfortably keep your hands where they belong. And, they come in a variety of colors to match your bike!
SRAM Master Cylinder/Lever Parts
$5.00 - $32.99
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
Jagwire C-Clips
$5.49 - $49.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
Page 1 of 25 Next page