Brakes/Levers/Pads

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability. - Compatible with Shimano Deore XT M8020, Saint M810 and M820, and Zee M640 - Compatible with TRP Quadiem, G-Spec Quadiem, Slate T4, and G-Spec Slate

· CNC machined in Barnoldswick, England · Includes mounting bolts

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Brass compression olive for Hope hydraulic disc brakes.

Brass hose insert for Hope hydraulic disc brakes.

Replacement pads for Hope E4 hydraulic disc brakes.

Clean up your cockpit with these direct mount shifter options for Tech levers. Featuring a variety of fitments, they reduce bar clutter and open up control layout options.

Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes

Hope V2 Caliper Disc Brake Pads. · Fits Moto, Tech, and Tech Evo V2 Brakes · Standard Compound: softer compound than sintered; works better in dry conditions, but wears faster

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XT SL-M770 2008-2011, Saint SL-M810 2009-2012 and SLX SL-M660 2009-2012 · Works on Hope Tech and Tech Evo levers only

Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

Replacement levers pivots pin kit for Hayes hydraulic disc levers

- Works with all Formula 74mm post mount brake calipers - IS: 51mm (International Standard) tab mount - PM: 74mm post mount

- Pad sets include pads and retraction spring for one caliper

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.

Smooth, controlled braking is yours with Avid's HSX Rotor. It utilizes cross-drilled technology to dissipate heat and shed water, giving you a consistent feel at the lever and predictable speed control in all conditions. And, an aluminum carrier cuts down on the weight.

Smooth, controlled braking is yours with Avid's HSX Rotor. It utilizes cross-drilled technology to dissipate heat and shed water, giving you a consistent feel at the lever and predictable speed control in all conditions. And, an aluminum carrier cuts down on the weight.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Magura Storm SL.2 Rotor - 6-bolt silver The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.