Other

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers

Recondition your Hope Brake Calipers with a Caliper seal kit. Available in multiple options for a variety of Hope Calipers.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

RockShox Carbon Headset Spacers - Includes 5mm (x2), 10mm, and 15mm spacers -  UD carbon fiber finish

This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.

- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex

- Machined aluminum ends with 50mm steel bolt

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

-Seatpost clamp for Defy/Avail Advanced models (2015-2016)

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)

-Seatpost clamp for Defy/Avail models

-Seatpost clamp for 2014 TCX Advanced models

• Anodized alloy cap • Fits handlebar inner diameter from 17.5mm • For MTB and Road use • Low profile design • Black plated bolt

The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 16mm long and made of rustproof stainless steel.

Replacement air spring parts for Diamond model suspension forks.

This is a replacement for the stabilizer unit of your Shimano rear derailleur, also commonly called a roller clutch assembly. A functional stabilizer keeps chains locked onto single ring setups, and reduces chainslap, mis-shifts, and ghost shifting. - Fits XTR RD-M9000, XT RD-M8000, SLX RD-M7000-11

If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 8mm long and made of light, durable aluminum.

RockShox Volume Reducer Kits

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

This pair of 14" long extenders attaches the Old Man Mountain rack frame to the rear of your bike. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware. - 14" length - Includes slots for adjustability - Made from 6061 aluminum and powder coated matte black for finish and durability - Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets - May need to be bent to fit width of frame - Includes hardware

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Damper rebuild kit for Topaz model rear shocks.

This kit includes all the parts required to rebuild your V2 Dropper Post. - Replacement Seal - Upper and lower bushings - Anti-rotation pins - Compatible with V2 Dropper Post ONLY.

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets